|
|
|
|
|
|
|
|
|
|
|
These SAND SNAKES are water containment systems little helpers! Just fill these 4' containers with sand to contain and funnel water back to your water capture device! Cheap and Easy to use! Great when used with the VacuBerm!
|
Part # BAPL-6130 has a description of FURY SAND TUBE 8" X 48"
|
The hydrotek VB040 Hydro Carbon Absorption Pillow. 40 pound capacity, 18" x 6"
|
|
|
|
|
|
|
|
|
|
|
|
|
The hydrotek ATP75 Vacuum Scupper Head 12" Wide Stainless Steel 2" Connection
|
Hydro Tek ZMAT6 Sand Bag Dam Stainless steel closure on both ends to easily fill partially with sand sand not incl.
|
Hose Vacuum Hose Truckmount 50ft x 2.0in Double Lined DHV50 DHV02 AH24 Crush proof hose 2" ID double lined vacuum hose. Includes glued on hose cuffs. Color is usually blue but not guaranteed. OEM Associations: Hydrotek DHV50, H-146, Mytee H183, DHV02, AH30, AH24, MP-160406-EA Super smooth interior surface
|
|
|
|
|
|
|
|
|
|
|
|
|
Part # BAPL-6051 has a description of FURY 2" X 50' VAC HOSE W/CAM LEVER
|
Part # BAPL-6079 has a description of FURY VACUUM DISK
|
Hydro Tek ATP40 5' Hydro Vacuum Arch Perhaps the easiest way to recover water today. Lay it on the ground, connect a vacuum system (75 - 200 CFM) via 2" hose and go to work. It's designed to work with all of our 2" vacuum recovery and flatwork systems. Manufactured using all corrosion resistant stainless steel inserts and supports and covered and sealed with high-grade closed cell foam material. This system creates a vacuum wall along the bottom edge and draws the effluent run off up from the ground for capture. Suitable for concrete or asphalt with 5' wide even surface
|
|
|
|
|
|
|
|
|
|
|
|
|
This kit includes part numbers:
ATP75 - Air Tool Vacuum Scupper ZMAT6 - Water berm 10' Sand Bag (x3) DHV50 - 50' x 2" Vacuum Hose VB040 - Oil Skim Water Filtration Bag
To be ordered and used with the RPV30E1H and the RPV50E1H units
|
Water Evacuation System with Pump Out The Hydro Tek RPV50E1 Hydro Vacuum® is a water capture and transfer system. It transfers the water while vacuuming, eliminating the inefficient task of having to continually dump your collection tank. The new RPV is ideal for flood and fire restoration contractors because of the large volume of water that can be removed. It is also useful for anyone wanting to eliminate water runoff at a job site or a pressure washer contractor collecting wastewater. 50gpm, 115v, 20amp or 5500w generator
|
The ANTV5 VACUUM SURFACE CLEANER with wash water recovery capabilities. The new ANTV5 VACUUM SURFACE CLEANER Twister Vac cleans a larger path than m any other recovery surface cleaner accessories. Connect the ANTV5 VACUUM SURFACE CLEANER to a hot or cold pressure washer and a vacuum source to wash and recover the wash water in one step. Efficiently clean without splashing dirty water on clean areas/windows and eliminate the hassle of having to do a final rinse.
BENEFITS OF THE ANTV5 VACUUM SURFACE CLEANER:
Save time – wider cleaning path, improved suction allows for faster cleaning and less time spent containing the water Save money – one accessory does the work of 3 others, and allows for less overhead Earn more per job with the ANTV5 VACUUM SURFACE CLEANER - clean faster and with fewer guys on each job
ADVANTAGES OF THIS ANTV5 VACUUM SURFACE CLEANER: Accomplish 3 tasks all at once: Wash Rinse Recover the dirty water
Large 24.5” cleaning path allows for cleaning over 20,000 sq. ft. per hour Stainless Steel deck and handle will not rust or corrode New Vac Tube design on the ANTV5 VACUUM SURFACE CLEANER allows for double the pickup hose to be attached – use with 100’ when hooking up to a Hydro Vac system Easily adjust the height of the casters to fit the surface you need to clean Hook up to a hot water pressure washer to clean even faster by cutting through grease and grime
|
|
|
|
|
|
|
|
|
|
|
|
|
A perfect tool for recycle / reuse on large amounts of flatwork. Complete with oil skimmer bag, quick dump / solids drain & a filter service indicator gauge. This unit can interface with our ANTV3 vac twister resulting in a closed-loop system. Includes 50' x 2" Vacuum hose, scupper and containment berms. Water is vacuumed-up and filtered through 6 stages to 5 micron and returned to the customers storage tank for reuse. Rated for 8.0 GPM / 104 CFM and 91" lift. Power Requirements: 3500W generator or 120 VAC/15A outlet
|
Part # BAPL-6945 has a description of FURY 2400CVU COMPACT VAC SYSTEM
|
Part # BAPL-6943 has a description of FURY 2400 VAC SYSTEM
|
|