XJV3G20E-F8 AR (Annovi Reverberi) Pump 3 GPM @ 2000 PSI
For parts just enter any part number on this breakdown in our search box for pricing and availability.
Oil Capacity = 4.5 oz, Maximum Fluid Temperature = 140° F, Inlet Thread
= 1/2”M, Discharge Thread = 3/8”M
SPECIAL NOTE: Use only AR64545
(click link to view/purchase oit) for the XJ/SJ/BK Series pumps only: Do NOT
change oil. Use oil only to add if low. This oil is a specially formulated synthetic
with special additives for the demands of the XJ, SJ and BK pump series. No
other oil is factory approved for these pumps, and could result in pump failure.
This AR XJV3G20E-F8 pump is designed for medium duty loads. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine, the matching flange provides convenient connections to most 5/8” shaft 3.5 – 6.5 HP engines. Optional vertical and horizontal setups. Precision die-cast crankcase with large cooling fins for maximum heat dissipation. Seals and V-Packings designed to continuously lubricate for extended life. The XJV3G20E-F8 has a Built-in unloader to optimize performance while reducing setup time. Integral trap pressure with fixed or adjustable chemical injector.
Items NOT INCLUDED with your pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD will 'dump' any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER - if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.