 |
 |
 |
|
RKA4G40HN pump from Annovi Reverberi. This AR Pump RKA4G40HN is one of the top of the line of the RKA Series of pumps. This unit has a flow rate of 4 GPM at 4000 PSI making it an ideal replacement pump for your pressure washers that need this kind of power and flow. As with all Annovi Reveberi Pumps, this unit is made with the strongest die cast metals and forged brass out sides, and the strongest ceramic designed plungers giving this pump one of the longest life's on the market. The RKA4G40HN pump is made to mount to a host of styles of pressure washers with either gearbox, coupling drive or even belt driven units. This powerful AR Pump can be used either on a gas driven pressure washer or an electric model with an 182 - 184 frame. Need parts for this pump? Check out the pump breakdown for repair of this RKA4G40HN pump.
- Max GPM.................. 4
- Max LMP.............................. 15.1
- Max PSI...................... 4000
- Max Bar............................... 275
- Power EBHP............... 11
- Bore Dia. mm......................... 18
- Stroke mm................... 12
- Weight Lbs............................. 19
- Max Temp................... 140°
- Oil Capacity........................... 15oz
- Inlet Thread ............... 1/2”F
- Discharge Thread................... 3/8”F
Items NOT INCLUDED with your pump that you may need: Check out the accessories for this pump on the right hand side of the page! They can help keep your pump running properly!
The PUMP GUARD will 'dump' any water above 145 degrees F. before it reaches your pump (saving you the trouble of rebuilding your pump)
PRESSURE REGULATOR / UNLOADER - if we list one to the right of the pump this is the model we suggest you use with your pump. Other models with different features like adjustable or fixed and with / without chemical injector are available.
The INLET WATER FILTER will catch most small debris before it enters your pump
The EZ-START VALVE will remove the pressure on your motor when you first start your pressure washer, this item eliminates you pulling your trigger on your pressure washer gun when starting your pressure washer
The PRESSURE GAUGE KIT allows you to monitor what pressure you are operating your pump at! This is very important when you are cleaning delicate items like decks, fences and cars! It also helps you diagnose pressure problems with your pump!
PUMP OIL, you can never have enough on hand! Many pumps ship with oil already in them. But you should always have a bottle on hand so you can change your pump oil according to the manufacturers instruction.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Forged Brass: Strength and no porosity long life. higher hydrostatic pressures – safety, performance.
- Inlet and Discharge Ports: Heavy bosses for added strength.
- Offset Discharge Ports: High efficiency, smooth flow.
- Bolts: Eight bolts, 8mm, grade 8.8.
- Valve Caps: Stainless steel on pumps rated at 3200 PSI and higher, better hydrostatic loads. Machined brass on pumps <3200 PSI.
- Ultra Form Cages: Durable, strength, and long life.
- Poppets, Seat and Spring: 303 and 400 series stainless steel.
- High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
- Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
- Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment and to maximize packing and seal life.
- Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
- Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
- Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
- Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
- Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
- Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and Oring plunger sealing system.
- Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
- Connecting Rods: One-piece special alloy aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
- Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
- Oil Seals and O-rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
- Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase.
- Oil Capacity: 15.5 oz.
- Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
- Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
|
|
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|